All Jura J series
are identical in terms of the external design with slight variations. Internal parts are 85% identical.
J9 features a TFT display and that's what set's it apart from J5 and J6 models.
We carry OEM replacement parts for Jura J series models. Our OEM
replacement parts selection includes brew group, thermoblock
120V, drainage valve, membrane regulator, water pump, water
tank, brew drive motor, and milk frother.
Like other fully
automatic espresso machines, we recommend that Jura J series must be frequently descaled every three months for
optimum espresso quality and milk frothing.
OEM Replacement Parts For Jura Impressa Models: Impressa J5, Impressa J6, Impressa J9, Impressa J9.2, Impressa J9.3, Impressa J9.4, and Impressa XJ9. Parts for European Jura J and XJ models can be special ordered.
Largest Selection of Jura Parts Including: Brew Groups, Brew Group Repair Kits, Grinders, Water Pumps, Sensors, O-Rings, Gaskets, Milk Frothers, Milk Container Gaskets, Milk Tubes, Hose Connectors, Drip Trays, Drip Tray Grids, Water Tanks, Water Tank Lids, Bean Container Lids, Thermoblocks, Pressure Hoses, Membrane Regulators, Valves, Silicone Tubing, Maintenance Kits, Coffee Grounds Containers, Milk Frothers and much more.
If you need a part that is not listed, please email us.
Jura
J series Diagram, Wiring Schematic, and Hydraulic System
JURA J5
JURA J6
JURA J9
Jura
J-Series DIY Repair Manuals and Video Tutorials
Removing Grinder Assembly
Fix Ceramic Valve
Fix "Missing Tray" Error
Common Issues and Malfunctions
Most
commom error related to all Jura espresso machines is
error code 8. This error is received primarily due
to lack of brew group maintenance. We receive numerous
emails from various owners for error
code 8. Often Jura espresso owners try to clean out
the used coffee grounds that get stuck in between
the brew group and and its bottom attachment,
also called drainage valve. Although this might fix
the error 8 temporarily but is not a permanent
solution.
Used coffee
grounds that are spilled over the drainage valve after
the espresso extraction cause drainage valve clogging
and ultimately lead to fungus and scale build up
around the drainage valve. This result in poor espresso
quality as drainage valve starts to leak and minimizes the
optimum pressure requires to extract aromatic espresso.
This can be verified by noticing
slightly increased volume of water in the drip tray
pan.
To encourage do it
yourself repairs, we sell Jura replacement brew group,
drainage valve, and a complete Jura brew
group sealing kit. We also sell the Jura key to
open the machine without any hassle.
If you are unable to
fix the brew group and other components of Jura J5 and J6
espresso machine, you can send the machine to us for
repairs. We fix your machine within two weeks time
frame as we carry all the OEM replacement parts at
our facility. Our certified espresso machine technicians
have been repairing Jura espresso machines since
2002.
A flat rate of $450 is
charged to repair and service per machine. This includes
complimentary cleaning, sanitizing, and maintenance of the
brew group.
When shipping
your machine to our service center, please include a check in
the amount of $450. We will repair the machine and return it
to you within two weeks. Click
here for shipping
instructions.
